The LITEBEAM 5AC GEN2 is a popular choice for point-to-point wireless networking, known for its cost-effectiveness and impressive performance. But to truly harness its power and deploy it effectively, you need to understand the information contained within its datasheet. The LITEBEAM 5AC GEN2 Datasheet is your key to unlocking its full potential, detailing everything from technical specifications to performance metrics.
Understanding the LITEBEAM 5AC GEN2 Datasheet A Comprehensive Guide
The LITEBEAM 5AC GEN2 Datasheet is much more than just a product brochure. It’s a comprehensive technical document that provides detailed information about the device’s capabilities, limitations, and operating characteristics. It’s essential for network engineers, installers, and anyone involved in designing or maintaining a wireless network using this device. This document describes all the critical parameters you should be aware of:
- Frequency Range: Understanding which frequencies the device operates on.
- Maximum Throughput: Knowing the maximum data transfer rate it can achieve.
- Antenna Gain: Understanding the signal amplification provided by the integrated antenna.
Datasheets are crucial for planning deployments. For example, the output power specifications in the datasheet determine the maximum distance the link can reach while ensuring adequate signal strength. By knowing the antenna gain and receiver sensitivity (both found in the datasheet), you can accurately predict link performance and troubleshoot any connectivity issues. The datasheet also lists environmental specifications such as operating temperature ranges, this information ensures that the device is deployed in a suitable location for reliable operation.
| Section | Importance |
|---|---|
| Specifications | Provides the fundamental technical details of the LITEBEAM 5AC GEN2. |
| Performance | Shows the data transfer rates and throughput capabilities. |
| Environmental | Details the device’s operating temperature, humidity, and other factors. |
Furthermore, the LITEBEAM 5AC GEN2 datasheet details all hardware specifications, the power requirements, and physical dimensions of the device. This knowledge is important when planning an installation or replacing faulty hardware. Manufacturers regularly update datasheets. These updates might include performance improvements, compatibility changes, or corrections. Therefore, it’s essential to use the latest version of the LITEBEAM 5AC GEN2 datasheet when designing or maintaining your network.
Now that you understand the power of the LITEBEAM 5AC GEN2 Datasheet, we encourage you to consult it directly for the most accurate and up-to-date information.